Nokia X6 Send, E60 and END keypad keys failure solution

If the Send, E60 and End key button keys failed to respond on Nokia X6, and you already tried to restore, reset, flash and update the device firmware but nothing happens.
Keypad keys malfunction on Nokia X6 may also possibly caused by a faulty keypad flex, cleaning or by replacing it will help solved the problem.



Nokia X6 joystick flex cable wire

If after replacing and ensuring that the flex is okay but the keys still unresponsive, you may then consider that the problem lies on a faulty keypad circuit's  hardware components on the PCB board. This solution below will tell us which components holds and controls the keypad keys to function or work.

Nokia X6 Send, E60 and End key malfunction solution
nokia X6 keypad IC jumper ways
Check the keypad pin connector first ensure that it is free from dirt and oxidation.
From the keypad pin connector there are three line filter coils located near to it, have a check on this components and replace if found damaged.
From the keypad filter coils the lines is feeds to a keypad filtering chip or keypad IC, you may then check this chip, trace its line paths and replace if found damaged.
The I/0 Expander Chip is the keypad controller components, which holds and control the keypads including the Touch Control Module. You may also rework or replace this chip for further harder keypad problem repair on Nokia X6.

No comments:

Post a Comment

Hello All Lovely User i am Here Any Kind Solution Need Just Comment Me i Try to Solved Of Your Problem Early Tnx To Visit Again My Blog

Related Posts Plugin for WordPress, Blogger...

All Gsm Solution Headline Animator

Blogger Tips and TricksLatest Tips And TricksBlogger Tricks

Please Log in