Here's a solution that can be used to fix and repair Nokia X6 Display problem issues like white screen, blue screen, blank screen, garbled and saturated screen displays.. This solution may help if having a LCD display problems and already tried to upgrade or restore the device firmware and replaced it with a new LCD module replacements but the problem still exists.
There are two voltage supply that also need to the LCD display to work,
the 1.8 volts and 2.78 volts.The solution above alao shows particular
components that needs to check and replace if found faulty or damaged
like the Display ESD-EMI filter IC.
If those supply voltages seems to be okay and the LCD display ESD-EMI filter IC is working well and already been checked and replaced the solution below shows the next components that also needs to check, rework or replace. On Nokia X6 there is a display controller IC that is being used and connected on the LCD display circuit.
If the LCD display
controller chip become faulty or damaged this will also result to a
display problem issues on Nokia X6. But before trying to reflow, rework
or replaced you need to check first the three filter coils connected
near to it and trace each line paths to the LCD pin connector.
Nokia X6 LCD Display solution
If those supply voltages seems to be okay and the LCD display ESD-EMI filter IC is working well and already been checked and replaced the solution below shows the next components that also needs to check, rework or replace. On Nokia X6 there is a display controller IC that is being used and connected on the LCD display circuit.
Nokia X6 Display problem solution ( Display controller IC )
No comments:
Post a Comment
Hello All Lovely User i am Here Any Kind Solution Need Just Comment Me i Try to Solved Of Your Problem Early Tnx To Visit Again My Blog