GPG Dragon with SPD 6820 Android Debug Read Back Manual working nice

1.Mobile phone state>>>>>Power On
2.Usb Debug>>>>On
3.Root>>>>Need
4.Cable>>>Normal USB Download Cable
5.Software>>>Dragon V3.41 or More New
6.Driver>>>Working in ADB Driver
7.Memory card>>>Need
Dragon Firmware 1.63 Download Now
Operational guidelines

Power on Mobile set, in the Mobile->Memu->Setting->Enabled USB Debug

Connect Mobile By Normal USB Cable(Mobile Flash cable not Boot cable)
suggest:Better is Connect Mobile after 10 sec or more after click software Start
Mobile Total has 3 driver or more,you just install the ADB Driver then ok!!!

before start read flash please close others Android Tools(even the sysc software)

Click Start after wait Software Finish(maybe Need 30 Min)





Software Total Read back 18 Block Data
<<About the Block>>Like Uboot is a block,Boot.img is a block,system.img is a block,NV data is a Block

After Read Block unit is unknow,software Analysis and recognition and create the correct Factory Flash Unit



Read Flash Done and Flash Ver Get!!!



Important Of Dragon Readback SPD Android Factory File!!!
Dragon Team Suggest you Close all the android tool before you read flash
and some software form computer others App ,when Mobile power on,this process auto start!!!
so Dragon Software Setting when in the Read Flash before check and auto close the process
Ex.


and also,you can setting it,
what you want to close;just in the Dragon/system/etab.ini file
del or add it!!!
Ex.